HIMS International Corporation H332B 用户手册

264 

 

Now that you have set up Window-Eyes, you need to finish the setup 
on the Braille Sense Plus B32.   
 

12.2.5.3 Setting up the Braille Sense Plus B32 

 
1.  Press “f1” to get to the Program menu. 
2.  Press “space-1” or “space-4” to get to the Utility menu, or just 

press the letter u.” 

3. Press “enter.” 
4.  Press “space-1” or “space-4” to get to Terminal for Screen Reader, 

and press” enter.” 

5.  Press “space-1” or “space-4” to get to Bluetooth Serial Port, and 

press “enter.” 

The Braille Sense Plus B32 should be connected as a Bluetooth 
Braille display.  To exit this mode from the Braille Sense Plus B32, 
press “space-z.”  Please note that “f1” on the Braille Sense Plus B32 
will still take you to the Program menu.  This is to allow you to use the 
applications on the Braille Sense Plus B32 at the same time, and be 
able to switch back to using the Braille Sense Plus B32 as a 
Bluetooth Braille display. 
 

 
You can use the LAN, FTP, and ActiveSync Bluetooth services all at 
the same time.  However, if you plan to use any of these services at 
the same time, you should connect the FTP service before 
connecting the LAN and ActiveSync services.  Otherwise, you may 
experience problems.  However, if you want to connect to the Serial  
Port, you should not connect to any of the other Bluetooth services in 
the Bluetooth Service list. 
 

 
Scanning Bluetooth device:  Enter-r (dots 1-2-3-5) 
Connecting device:  Enter on the device name 
Connecting service:  Enter on the service name 
Disconnect service:  Enter-d (dots 1-4-5) 
Move to Bluetooth device list in service list:  Backspace 
Remove device setting in Bluetooth device list:  Enter-s (dots 2-3-4)