HIMS International Corporation H332B 用户手册
315
(1) “setup IP: Automatic” combo box: You can switch between
automatic and manual by pressing “space-4” or “space-1.” If
you select “manual,” you will need to enter your IP address,
subnet mask, gateway IP address, and DNS IP address by
yourself. You can move between these computer edit boxes by
pressing “space-4” or “space-1.” Press “tab (“space-4-5”)” to
move to the next control.
you select “manual,” you will need to enter your IP address,
subnet mask, gateway IP address, and DNS IP address by
yourself. You can move between these computer edit boxes by
pressing “space-4” or “space-1.” Press “tab (“space-4-5”)” to
move to the next control.
(2) “network name (SSID)” computer edit box: The edit box is
empty and you can type in network name you prefer.
(3) “network mode” combo box: Here you can select between
“infrastructure,” and “802.11 ad-hoc” mode by pressing “space-
1” or “space-4.”
1” or “space-4.”
(4) “network authentication mode” combo box: Here you can select
between “open,” “shared,” and “wpa-psk” by pressing “space-1”
or “space-4.”
or “space-4.”
(5) “data encryption” combo box: Here you can select the data
encryption method by pressing “space-1” or “space-4.” If you
select “open” or “shared” in network authentication mode, you
can choose between “disable” and “wep.” And if you select
“wpa-psk” in network authentication mode, you can choose
“tkip.”
select “open” or “shared” in network authentication mode, you
can choose between “disable” and “wep.” And if you select
“wpa-psk” in network authentication mode, you can choose
“tkip.”
(6) “the key is provided automatically” check box: If the “access
point” does not provide a key for users automatically, uncheck
this check box by pressing “space.” The default is that the
check box is checked.
this check box by pressing “space.” The default is that the
check box is checked.
(7) “network key” computer edit box: This is a computer edit box to
type the network key if the key is not provided automatically.
(8) “key index” edit box: This is an edit box to type the key number
of the wireless access point that matches the network key input.
(9) “confirm” button: Pressing this button applies the changes.
(10) “cancel”
(10) “cancel”
button:
You can press this button to cancel the
setup.
Selecting “open” in “data encryption” skips numbers 6 through 8,
and checking “the key is provided automatically” check box will
omit the numbers 7, 8.
3) “remove” button: If you want to delete a profile item in the profile list,
select the profile item you wish to delete, and then press “r (dots 1-