HIMS International Corporation H332B 用户手册

19 

 

The blinking “dots 7-8” will be displayed when you are in the 
“overwirte mode” in the word processor.  The blinking “dots 1-2-3-4-5-
6-7-8” will appear when you are using the “start selection” setting in 
the word processor and when you are in an edit box.  In all other 
situations, the cursor will be displayed as “dots 7-8.” 

 

2.4.2.3 Eight Dot Mode 

 

 

 
You can choose to use a 6-dot-Braille or 8-dot-Braille display when 
using ASCII text mode.  The shortcut key is “e (dots 1-5).”  By default 
the 8-dot-Braille display is set to off.  You can switch this option to 8-
dot-Braille mode by pressing the “space” key.  You can toggle this 
option on or off by pressing “F1-down scroll button” while you are 
using another program in the Braille Sense Plus B32, without having 
to pull up the “option” menu.  If you have changed the setting, press 
the “enter” key to save the setting.  You can also “tab (“space-4-5”)” 
or “shift-tab (“space-1-2”)” to the “confirm” button, and press “enter.”  
If you do not want to save the setting, “tab (“space-4-5”)” or “shift-tab 
(“space-1-2”)” to the “cancel” button, and then press “enter.”  You can 
also cancel saving the setting by pressing “space–z (dots 1-3-5-6)” or 
“space-e (dots 1-5).” 

 

2.4.2.4 View/input the Grade of Braille   

 

 

 
You can choose what grade of Braille you want the Braille display to 
use when reading.  The shortcut key is “g (dots 1-2-4-5).”  The setting 
choices are grade 1, grade 2, and ASCII.  You can switch between 
the settings by pressing the “space” key.  You can press “space-g 
(dots 1-2-4-5)” to cycle through the three settings while you are using 
other programs without calling up the “option” menu.  If you have 
changed the setting, press the “enter” key to save the setting.  You 
can also “tab (“space-4-5”)” or “shift-tab (“space-1-2”)” to the “confirm” 
button, and press “enter.”  If you do not want to save the setting, “tab 
(“space-4-5”)” or “shift-tab (“space-1-2”)” to the “cancel” button, and 
then press “enter.”  You can also cancel saving the setting by 
pressing “space–z (dots 1-3-5-6)” or “space-e (dots 1-5).”