HIMS International Corporation H432B 用户手册
While editing a document, you can press “Space-3-6” to activate this
function. In order to return to the document that you are editing, press
any key.
function. In order to return to the document that you are editing, press
any key.
5.4.10 Read Status
This function will tell you information about your current file. If you
activate this function, the Braille Sense U2 will tell you the “file name,”
“edit mode (insert or overwrite),” and “file protection(write or read only).”
To execute this command, press “Space-m (dots 1-3-4)” or “F2,” and
move to the “Read” menu by pressing “Space-4.” Then, press “Enter.”
Move to “Read Status” by pressing “Space-4,” and then press “Enter,” or
you can press “s (dots 2-3-4)” in the read menu, which is the short cut.
While editing a document, you can press “Space-3-4” to activate this
function. In order to return to the document that you are editing, press
any key.
activate this function, the Braille Sense U2 will tell you the “file name,”
“edit mode (insert or overwrite),” and “file protection(write or read only).”
To execute this command, press “Space-m (dots 1-3-4)” or “F2,” and
move to the “Read” menu by pressing “Space-4.” Then, press “Enter.”
Move to “Read Status” by pressing “Space-4,” and then press “Enter,” or
you can press “s (dots 2-3-4)” in the read menu, which is the short cut.
While editing a document, you can press “Space-3-4” to activate this
function. In order to return to the document that you are editing, press
any key.
5.5 Layout
The “Layout” command sets the layout for printing on an ink printer or
embossing on a Braille printer. The “Layout” menu has the following
submenus: “Braille Document Layout,” “Print Document Layout,” “Braille
Paragraph Layout,” and “Print Paragraph Layout.” The changes that are
made with the “Layout” command are not displayed on the Braille
display. In order to check the layout, call up the menu by pressing
“Space-m (dots 1-3-4)” or “F2,” and check the layout values one by one.
The changed values will be displayed within the menu.
embossing on a Braille printer. The “Layout” menu has the following
submenus: “Braille Document Layout,” “Print Document Layout,” “Braille
Paragraph Layout,” and “Print Paragraph Layout.” The changes that are
made with the “Layout” command are not displayed on the Braille
display. In order to check the layout, call up the menu by pressing
“Space-m (dots 1-3-4)” or “F2,” and check the layout values one by one.
The changed values will be displayed within the menu.
5.5.1 Braille Document Layout
While you are editing a document, press “Space-m (dots 1-3-4)” or “F2”
to call up the menu, and select “Layout” or press “p (dots 1-2-3-4),”
(which is the short cut), and then select “Braille Document Layout.” Or,
you can press “Backspace-p (dots 1-2-3-4).” “Braille Document Layout”
is used to set the width and height of the paper for embossing as well as
the following options. Whenever you change a layout setting while you
to call up the menu, and select “Layout” or press “p (dots 1-2-3-4),”
(which is the short cut), and then select “Braille Document Layout.” Or,
you can press “Backspace-p (dots 1-2-3-4).” “Braille Document Layout”
is used to set the width and height of the paper for embossing as well as
the following options. Whenever you change a layout setting while you