HIMS International Corporation H432B 用户手册

6) 

Select the COM port that was given as the outgoing COM port 

when you setup the computer to interact with the Braille Sense U2 
via Bluetooth. 

7) Press 

“Enter” 

Now that you have set up Window-Eyes, you need to finish the setup on 
the Braille Sense U2. 

1) 

Press “F1” to get to the Program menu. 

2) 

Press “Space-1” or “Space-4” to get to the Utilities menu, or just 

press the letter u.” 

3) Press 

“Enter.” 

4) 

Press “Space-1” or “Space-4” to get to Terminal for screen 

reader, and press” enter.” 

5) 

Press “Space-1” or “Space-4” to get to Bluetooth Serial Port, and 

press “Enter.” 

The Braille Sense U2 should be connected as a Bluetooth Braille display. 
To exit this mode from the Braille Sense U2, press “Backspace-Space-
z.” Please note that “F1” on the Braille Sense U2 will still take you to the 
Program menu. This is to allow you to use the applications on the Braille 
Sense U2 at the same time, and be able to switch back to using the 
Braille Sense U2 as a Bluetooth Braille display. 

If you use this service, you can connect a Bluetooth keyboard.   
In order to use this service, you must turn on the Bluetooth keyboard. 
You can connect a Bluetooth keyboard by doing the following. 

1) 

Move to Bluetooth keyboard and press “Enter” in device list. 

2) 

And then “Keyboard” service will displayed. 

3) 

Press “Enter” on “Keyboard” service. 

4) 

And then you will be prompted to input PIN code if Bluetooth 

keyboard require you to input PIN code. Otherwise, you don’t need 
to input PIN code.