HIMS International Corporation H432B 用户手册

If you want to activate “Setup internet,” press “Enter” on “Setup internet” 
in the “Utilities” menu, or press “I (dots 2-4)” in the “Utilities” menu. You 
can move through the “Utilities” menu items with “Space-1” or “Space-4.” 
If you want to access to Internet with the Braille Sense U2, you must set 
the Internet settings at “Setup internet” that is one of the submenus of 
“Utilities” menu. 
Or, if the PC in which the Active Sync program is installed is connected 
to Internet and the Braille Sense U2 is connected to that PC, then you 
can connect the Braille Sense U2 to Internet. 

The functions of this menu are explained in greater detail in the following 
sections. 

If you are going to set up a LAN, you should first connect a LAN cable to 
the Braille Sense U2. In this setup, you can decide whether you will use 
the automatic or manual setup to setup your IP configuration. If you want 
to set it up automatically, press “Enter” on “Setup IP: Automatic.” Then, it 
will be set up automatically. For the automatic setup, your host server 
should provide DHCP service (Dynamic Host Configuration Protocol). 

If you want to set up your IP configuration manually, move to “Manual” 
by pressing “Space-1” from the “setup IP: Automatic,” and press “Enter.” 
Then, you will find the following: “IP,” “Subnet mask,” “Gateway,” and 
“Primary DNS.” These settings require specific information. Please 
contact your Internet service provider for the right information. To type in 
the information, you should use computer Braille, and after typing in the 
information, you can move to the next item by pressing “Space-4.” 
Finally after completing the “Primary DNS,” press “Enter.” Then, you will 
see the message “setting completed.” You will be returned to “Setup 
internet” with your information saved. You can then use E-mail, MSN 
messenger or the Web browser.