HIMS International Corporation H432B 用户手册

To hide unused program, follow these steps below. 

(1)   When executing “Menu manager”, the list of the Braille Sense U2 

program will be displayed.   

(2)   Pressing “Space-1” or “Space-4” to move to the program that you 

want to hide and press the Space to change to “off”.   

(3)   When checking all the programs as “off”, you need to press Enter. 

Or pressing “Tab (Space-4-5)” to move to “Confirm” and press 
Enter.

(4)   Setting is complete. Press the Reset button which is located at 

the back of the Braille Sense U2. 

(5)   And when navigating between each program, “off” program will 

not be displayed.   

If you want to use the program again, execute the “Menu manager” and 
press the Space to change to “on”. And press the Reset button to reset 
the Braille Sense U2. When the Braille Sense U2 reboots itself, the 
program will be displayed.   

To use the Braille Sense U2, you may need to format. This program can 
be found in the “Utilities” menu. You can execute this program by 
pressing “f” in the “Utilities” menu. When you format Braille Sense U2, all 
information is erased. Therefore, before you format Braille Sense U2, 
you are advised to backup important data. 

To execute format the disk, two methods are discussed separately 
below.

First, you can format the disk in Utilities program. 

1) 

Go to the “Format” in Utilities program. 

2) 

Pressing “Enter”, it will be focused in the “Disk: flashdisk”. 

3) Press 

“Enter”