HIMS International Corporation H432B 用户手册
to return to the previously-running program. If you want to switch
between programs while running more than one program, press “F1”
and “F4” keys at the same time to open the Task Name. The Task Name
shows the names and numbers of the running programs, just like the file
manager. You can cycle through the running programs on the Braille
Sense U2 with the “Space-1” or the “Space-4” and scroll buttons. Press
“Enter” key to run the program that you want after focusing on your
selection.
between programs while running more than one program, press “F1”
and “F4” keys at the same time to open the Task Name. The Task Name
shows the names and numbers of the running programs, just like the file
manager. You can cycle through the running programs on the Braille
Sense U2 with the “Space-1” or the “Space-4” and scroll buttons. Press
“Enter” key to run the program that you want after focusing on your
selection.
The combination of the “F2” and “F3” keys can switch between all of the
running programs immediately without opening the Task Name. It
functions the same way as the “alt-tab” keys on your PC. If you are
running three programs and you are in the second program, pressing the
“F2” and “F3” keys at the same time will move you to the third program.
If you press “F2-F3” again, you will be on the first program.
In the above case, pressing “Space-z (dots 1-3-5-6)” will close the
current running program and move you to the previous program.
However, if there is only one program running, pressing “Space-z (dots
1-3-5-6)” will close the program and move you to the Braille Sense U2
“program” menu. Note that “Space-z (dots 1-3-5-6)” is different from the
“escape” key, which does not close programs.
running programs immediately without opening the Task Name. It
functions the same way as the “alt-tab” keys on your PC. If you are
running three programs and you are in the second program, pressing the
“F2” and “F3” keys at the same time will move you to the third program.
If you press “F2-F3” again, you will be on the first program.
In the above case, pressing “Space-z (dots 1-3-5-6)” will close the
current running program and move you to the previous program.
However, if there is only one program running, pressing “Space-z (dots
1-3-5-6)” will close the program and move you to the Braille Sense U2
“program” menu. Note that “Space-z (dots 1-3-5-6)” is different from the
“escape” key, which does not close programs.
2.10 Switching Audio mode
The audio buttons on the front panel will work for different function
according to the location of Audio mode switch.
If you push the audio mode switch to the left side, the Braille Sense U2
will say “radio mode” and the audio buttons will work for the FM Radio
program. If you set the audio mode switch to the center, the Braille
Sense U2 will say “daisy mode” and the audio buttons will work for the
Daisy program. If you push the audio mode switch to the right side, the
Braille Sense U2 will say “media mode” and the audio buttons will work
for the Media program.
according to the location of Audio mode switch.
If you push the audio mode switch to the left side, the Braille Sense U2
will say “radio mode” and the audio buttons will work for the FM Radio
program. If you set the audio mode switch to the center, the Braille
Sense U2 will say “daisy mode” and the audio buttons will work for the
Daisy program. If you push the audio mode switch to the right side, the
Braille Sense U2 will say “media mode” and the audio buttons will work
for the Media program.
So in order to use the audio buttons as you desire, you have to set the
audio mode switch to the proper position. For example, when you are
audio mode switch to the proper position. For example, when you are