Zebra Technologies Corporation HZD-4300 用户手册
Chapter 2: Infrastructure Device Installation
2-2
July 2006
Equipment Specification
The specifications listed in the following table apply for all Infrastructure devices.
Table 2-2
HOTZONE DUO Infrastructure Device Radio Characteristics
Characteristic
2.4GHz
802.11 b/g
5.8GHz
802.11a
Output Power
30 dBm
30 dBm
RF Modulation
CCK/OFDM
OFDM
Operating Frequency (GHz)
2.4-2.4835
5.725-5.825
Maximum Burst Data Rate
54 Mbps
54 Mbps
Spectrum Used
20 MHz
20 MHz
Ports and Connections
The following list defines the standard ports and connections on IAPs and MWRs:
•
Device Enclosure with 2 N-type Female Antenna Connector
•
120V A/C Power Cable with flying leads
•
One RJ45. (On IAP devices only: External power supported on only one. Canopy
Connect POE Only.)
Connect POE Only.)
•
On-board switch to supply power on Ethernet lines (for Canopy connectivity)
•
Three pin RS232 connector
•
Mounting Bracket (Standard and Optional)
Operator Supply List
The Network Operator must supply the following equipment:
•
Mounting Location
•
Power Source (120V A/C depending on IAP configuration)
•
Ethernet connection between the IAP and MiSC.