Zebra Technologies Corporation AP716101 用户手册
28
AP 7161 Access Point Installation Guide
Examples for using the extension arm alone, or with the mounting bracket kit for a pole mount installation are
shown below:
shown below:
Wall Mounted Installations
For wall mounted installations, use only the access point bracket and angle adjust bracket sections.
CAUTION
Always mount the AP 7161 with the black gore vent facing down.
NOTE
The U-bolt and band clamps are not included in the mounting bracket kit.
NOTE
The lag bolts are not included in the mounting bracket kit.
1.
With the open slot connections facing down, attach the angle adjust bracket section at the desired mounting
location using four #10/32 lag bolts.
location using four #10/32 lag bolts.