Zebra Technologies Corporation WMC63000303 用户手册
MeshNetworks
8
Insert the WMC6300 Wireless Modem Card
Complete the following procedure to install the WMC6300 Wireless Modem Card
in the computer.
in the computer.
1. Locate an available Type II PCMCIA card slot in the PDA. If necessary,
remove the slot dust cover from the slot.
2. To ensure the correct orientation of the card, insert the WMC6300
Wireless Modem Card into the computer’s PCMCIA card slot with the
label side up as shown in Figure 7.
label side up as shown in Figure 7.
CAUTION - Never force the card into the slot.
Figure 7.
Installing the WMC6300 Wireless Modem Card
3. When
the
WMC6300 card is detected, a “Start” window is displayed as shown.
The “Use server-assigned IP address” radio button should be selected. Click on “OK”
located in the upper right corner of the window.
located in the upper right corner of the window.
4. A MeshTray icon will be displayed on the screen of the PocketPC. A “green” icon
indicates successful connection to the network.
5. MeshTray executes automatically whenever the WMC6300 card is inserted into a
PocketPC device. Tap on the MeshTray icon to display status information for the
WMC6300 card as shown below.
WMC6300 card as shown below.