Peiker acustic GmbH WMI2W167 用户手册

_____________________________________________________________________________________________________________________________

2.6

TECHNICAL SETUP

Pre-Caution:

Before testing the unit make sure that the
doesn´t exceed a voltage over 12V to avoid short

Connect the wireless charger with the power supply system

by using the red and black cables (the yellow cable is

irrelevant).

Connect the wireless charger with the

adapter via the green/yellow cable.

Connect the USB Can adapter with a computer.

Turn on the power supply system.

Note: The LEDs of the CAN-Adapter are going

on and off several times. This process is uncritical

_____________________________________________________________________________________________________________________________

VALEO – Product Line Valeo peiker Telematics

Before testing the unit make sure that the power supply system
doesn´t exceed a voltage over 12V to avoid short-circuit.

Connect the wireless charger with the power supply system

by using the red and black cables (the yellow cable is

Connect the wireless charger with the USB Can

Connect the USB Can adapter with a computer.

Adapter are going

several times. This process is uncritical

________________________________________________________________________________________________________________________________

Page 11

Valeo peiker Telematics - www.valeo.de