Radio Systems Corp 3002646 用户手册

  www.petsafe.net 11

Step 4

The Handheld Remote, Pee Pad Clip and Treat Dispenser are paired from the factory. If you installed 

the batteries properly and the Treat dispenser is not responding to the handheld Remote or Pee Pad 

Clip, follow these steps:
1. Remove the battery from the Pee Pad Clip.
2. Begin with the Treat Dispenser Off. Press and hold the power button for 4 seconds. During this time 

the green LED will appear solid. After the green LED disappears, release the button. The green LED 

will now flash for 30 seconds indicating the treat dispenser is in paring mode.

3. While standing at least 3 feet away from the Treat Dispenser, press and release the Handheld 

Remote button once. The LED will flash orange and emit a confirmation tone (if the audible tone is 

enabled) when the Handheld Remote is paired.

4. While standing at least 3 feet away from the Treat Dispenser, insert the battery into the Pee Pad Clip. 

The Pee Pad Clip will automatically send a pairing message after the green LED turns off. The Treat 

Dispenser LED will briefly turn orange and emit an audible tone (if the audible tone is enabled), when 

the Pee Pad Clip pairs.

5. After 30 seconds the Treat Dispenser pairing mode is automatically exited. To exit pairing mode prior 

to 30 seconds press and release the Treat Dispenser button.

6. To test the Pee Pad Clip pairing, remove the battery from the Pee Pad Clip and return after 1 second. 

If paired correctly, the Treat Dispenser will dispense a treat.

7. To test the Handheld Remote pairing, push and release the Handheld Remote button once. If paired 

correctly, the Treat Dispenser will dispense a treat.

8. If the Handheld Remote or Pee Pad Clip is still not pairing, please contact the Customer Care Center.