FreeWave Technologies Inc. 218151431519 用户手册
760 Mhz Data Transceiver Users Manual
LUM0000XX Rev A
Version 1.0
15
Call Book
The Call Book is required to be used in Point-to-Point networks. The instructions provided in this section
are for Point-to-Point mode only.
are for Point-to-Point mode only.
Using the Call Book offers both security and flexibility in determining how FreeWave transceivers
communicate with each other.
communicate with each other.
Three settings must be made for two FreeWave transceivers to communicate in Point-to-Point mode:
1.
The Master’s serial number must be listed in the Slave's Call Book or Slave Security is turned off
in the Slave.
2.
The Slave’s serial number must be listed in the Master's Call Book.
3.
The Master must be programmed to call the Slave.
The Call Book allows users to incorporate up to 10 FreeWave transceivers, and designate which Slave the
Master will call. To set the Entry to Call option, enter C at the prompt, followed by the menu number
corresponding to that Slave. To call any available Slave in the list, enter C then enter A to direct the Master
to Call All.
Master will call. To set the Entry to Call option, enter C at the prompt, followed by the menu number
corresponding to that Slave. To call any available Slave in the list, enter C then enter A to direct the Master
to Call All.