Renishaw plc RMP60 用户手册

The RMP60 probe can be in one of three modes:

1. Stand-by mode - The RMP60 is waiting for

a switch-on signal .

2. Operating mode - Activated by one of the

switch on methods described on this page.

In this mode and the RMP60 is now ready

for use.

3. Configuration mode - The trigger-logic

configuration method allows a number of

RMP60 set-up options to be configured by

triggering the RMP60, including the switch-off

options described on

 

page 25.

Modes of operation

Switch-on options are configurable

 - see page 13.

Three switching methods can be used.

Radio switch-on is commanded by

M code.

Spin at 650 rev/min for 1 sec minimum

(maximum 6 sec)

RMP60 will be turned on after 1 sec in all

modes.