R F Technologies Inc ATZ24262 用户手册

Series 5.0 Software (0510-1059-A_DRAFT) - User Guide

 13

9600 QR System

Routers receive signals from transceivers, add location data and re-transmit them to the Gateway. If your facility 
requires the use of Routers with your system, install them according to the floor plan you received. Mount the 
enclosures as high on the wall as possible. Two factors that affect the placement of Routers are the availability of a 
power source and sufficient coverage for the supervision of transceivers. 

The optimal position of the Router antenna is upright, pointing towards the ceiling. Routers are supervised; a 
routine signal is sent from each Router and if the signal is not received by the system, a Device Fault event is 
generated in the Event List at the computer. Routers are powered by a plug-in power supply; a backup battery is 
also included in the Router enclosure.

A Universal transceiver (not shown) can be used to integrate your facility’s existing equipment such as backup 
generators, pull-cord devices, or smoke detectors with the software. A Universal transmitter activates from any 
normally open (NO) or normally closed (NC) dry-contact device; as soon as the device is activated, it 
automatically activates the Universal transmitter which then sends event information to the Client computer(s).

: Sufficient coverage can be determined by testing the area with a site survey kit. 

For more information, contact the RF Technologies, Inc. Customer Solution Team at 
(800)-669-9946 or (262) 790-1771.