Delphi Electronics & Safety 0053TR 用户手册
Owner´s Manual DEA5XX Radios
11 |
P a g e
Folder Down
Press to select previous Folder, if playing a
specific playable scope, when pressed will
jump and starts playing track 1 as newly
inserted USB
specific playable scope, when pressed will
jump and starts playing track 1 as newly
inserted USB
SCAN
Short press to start the SCAN of the current
playing context.
Long press to SCAN the whole device starting
on track1.
playing context.
Long press to SCAN the whole device starting
on track1.
Error Messages
If an “
UNSUPPORTED
” message is displayed,
it could be for one of the following reasons:
When a MTP Player or a USB device with
unsupported
format
or
partition
is
connected.
When the device is damaged.
When the connected device was not
When the connected device was not
connected as mass storage device.
If “
NO MUSIC
” message is displayed, it could
be because there are not MP3 or unprotected
WMA files that can be played.
WMA files that can be played.
Front Auxiliary
In front auxiliary mode, you can play an external
device such as an iPod
device such as an iPod
®
or MP3 player via the
auxiliary input jack on the front of the receiver.
To use an external device simply connect the
device via the auxiliary input jack.
Front auxiliary mode will not be available if no
device is connected to the auxiliary input jack
on the front of the receiver.
To use an external device simply connect the
device via the auxiliary input jack.
Front auxiliary mode will not be available if no
device is connected to the auxiliary input jack
on the front of the receiver.
Rear Auxiliary
In rear auxiliary mode, you can play an external
device that you have connected via the
receiver’s rear power auxiliary input lines.
To use an external device simply connect the
device via the auxiliary input jack and select it
using the source button.
Rear Aux source will be available even when no
device is attached to the rear input.
device that you have connected via the
receiver’s rear power auxiliary input lines.
To use an external device simply connect the
device via the auxiliary input jack and select it
using the source button.
Rear Aux source will be available even when no
device is attached to the rear input.
Bluetooth (If Equipped)
The radio can connect to a Bluetooth Device.
To use this functionality your device requires
Bluetooth and to be paired and connected to
the radio.
The supported device list is located in the
following web page:
To use this functionality your device requires
Bluetooth and to be paired and connected to
the radio.
The supported device list is located in the
following web page:
http://www.panapacific.com/support
Other devices may be connected and played
but functionality cannot be guaranteed.
You can connect up to 10 devices to the radio;
the radio will connect to the first available paired
device, starting from the last paired/connected
device.
The Bluetooth Menu is available when the
Phone button is pressed for more than 3
seconds. To navigate through it, rotate the
knob.
The Bluetooth Menu consists of the following
options:
BT
ENABLE,
CONNECT
PH,
DISCONNECT PH, ADD PHONE and DELETE
PH (some options are only available when a
device has been paired previously)
PH (some options are only available when a
device has been paired previously)
Enabling/Disabling Bluetooth
To Enable/Disable Bluetooth in your Radio (if it
is not already activated):
is not already activated):
Press the Phone button for more than 3
seconds while the Radio is ON. The
Bluetooth Menu will be shown.
Bluetooth Menu will be shown.
Rotate the Volume Knob until the display
shows: “BT Disable” or “BT Enable”.
Press the Volume Knob to Enable or
Disable the Bluetooth.
When devices were previously paired the
Phone Icon will be active and the arrow icons
will blink until the reconnection of the previously
paired phones is attempted (each phone
reconnection will be attempted three times).
Phone Icon will be active and the arrow icons
will blink until the reconnection of the previously
paired phones is attempted (each phone
reconnection will be attempted three times).
Pairing a Bluetooth Device
To complete pairing the following steps must be
followed:
followed:
1. Enable Bluetooth on the radio and on the
device. Refer to your device’s Manual for
more information.
more information.
2. Pair the Device to the Radio:
Press the Phone button for more than 3
seconds The Bluetooth Menu will be
shown.
shown.
Rotate the Volume Knob until the display
shows: ADD PHONE.
Press the Volume Knob to confirm the
action.
The radio will display ADDING PH for 3
seconds. In this discoverable mode, the
Bluetooth status icon will blink for up to 3
minutes. If no phone was found, the radio
will display NO PH FOUND and the Phone
and arrows icon will be disabled.
Bluetooth status icon will blink for up to 3
minutes. If no phone was found, the radio
will display NO PH FOUND and the Phone
and arrows icon will be disabled.
During the discoverable mode set your cell
phone to add a Bluetooth device and look
for the name “Delphi500 Radio.”
for the name “Delphi500 Radio.”