Tagmaster AB XTMX 用户手册
XT-1/XT Mini Manual
13-111 05, 2015-08-14
Page 10 of 32
Wire Connections
2.5.1 Spring Cage Terminals
With the exception of Ethernet and USB, all wires are connected to spring cage terminals.
These terminals are easy to use and work with both solid and stranded wires.
Instructions
1.
These terminals are easy to use and work with both solid and stranded wires.
Instructions
1.
Strip wire lead approximately 9 mm.
2.
Push screwdriver down to release spring cage.
3.
Insert wire into terminal.
4.
Remove screwdriver to clamp wire.
5.
Gently pull installed wire to make sure connection is reliable.
Wire size
0.5 mm
2
- 1.5 mm
2
(AWG 20 - AWG 16)
Table 1 Wire connection overview
2.5.2 Ethernet and USB
Ethernet connections are made with standard RJ45 connectors. Make sure to pass the Ethernet cable
through the cable gland before crimping the connector to the cable.
USB is intended for service and maintenance and is therefore connected only when the lid is open.
Connection is done using a standard USB type B cable.
through the cable gland before crimping the connector to the cable.
USB is intended for service and maintenance and is therefore connected only when the lid is open.
Connection is done using a standard USB type B cable.