Hunter Industries Inc SSW 用户手册
6
ConneCTinG To THe ConTroller
installing and Wiring the module
Begin.by.activating.the.CR2032.backup.battery.(used.for.date/
time.backup.in.the.event.of.a.power.outage).by.pulling.the.battery.
insulator.at.the.bottom.of.the.module..The.expected.battery.
life.is.ten.years..If.the.battery.requires.replacement,.the.battery.
compartment.is.located.on.the.back.of.the.Solar.Sync.module..
Remove.the.cover.and.install.the.battery.with.the.positive.side.(+).
of.the.battery.visible,.facing.toward.you..Replace.the.battery.cover..
Replace.battery.with.CR2032.type.battery.only..Use.of.another.
battery.may.present.a.risk.of.fire.or.explosion.
note:
battery may explode if mistreated. do not
recharge, disassemble or dispose of in fire.
The.Solar.Sync.module.
is.designed.to.be.
wall-mounted.next.to.the.
irrigation.controller..A.
rubber.cover.is.provided.
for.outdoor.installations.
to.protect.the.module.
from.the.weather..Use.two.
anchors.or.self-tapping.
screws.to.secure.the.
module.to.the.wall..
Place.the.rubber.cover.
mounting.tab.behind.the.
module.before.screwing.
the.module.to.the.wall.
note:
If you are installing Solar Sync on an ACC or
X-Core Controller, the Solar Sync Module is not required.
For the ACC or X-Core controllers, the WSSSEN kit should
be used, as it does not include the Module. (See the
controller‘s owner‘s manual for more details.)
For the ACC or X-Core controllers, the WSSSEN kit should
be used, as it does not include the Module. (See the
controller‘s owner‘s manual for more details.)