RF Ideas Inc LC80XW6 用户手册
©2015 RF IDeas
Configuration Utility User Manual
P a g e
|
8
2.5 Minimum System Requirements
Components
Minimum System Requirements
Hardware
Pentium Class PC
Memory
64 MB RAM
Disk
650 MB Hard Disk Space
I/O
1 available RS-232 or USB Port
Operating
System
Any operating system that supports a USB keyboard including Microsoft Windows 2000®,
XP®, Vista®, 7®, 8®, 8.1®, 8.2®, Server 2003®, and Server 2008®.
XP®, Vista®, 7®, 8®, 8.1®, 8.2®, Server 2003®, and Server 2008®.
The software does not perform any data validation checking. The data must be known before it is
read to verify its validity.
read to verify its validity.
2.6 Reader Setup Basics
To setup the reader:
1. Plug the connector into the workstation’s (or available on any peripheral) open RS-232, USB, or
Ethernet plug.
2. Place the device next to the monitor, beside the workstation, or where appropriate.
3. The workstation should detect new hardware for USB connections. Verify the workstation
recognizes this connection using Device Manager.
4. Verify the correct COM port for RS-232 DB9 connections using Device Manager.
When the software is installed, it should recognize these connections in order to configure the
appropriate device. Once the device is configured and written to its flash memory, these settings will not
have to be configured again.
appropriate device. Once the device is configured and written to its flash memory, these settings will not
have to be configured again.
2.7 LED
The desktop, USB dongle, surface mount, and non-housed model readers are all equipped with a light
up LED on the front cover.
up LED on the front cover.