Kenwo Industries Limited ARI60 用户手册
ess button 4
atedly to
l though the
rammable
s
Shock Trigger
Perimeter Trigger
Clock
Signal Indicator
Alert Type Aud/Vibr
System Status
Button #3
Button #2
Button # 1
Battery Level Indicator
Tilt Trigger
Ignition Trigger
Back up Power
Activated
Activated
Button #4
Audible/ Silent
Alert Indicator
Alert Indicator
2. Press button
#4 to save and
exit
1. Press button
4 to scroll
4 to scroll
between the
sensor icons
3. Press button 1 to
toggle between
sound and duration
4. Press button 2
to adjust
5. Press button 4 to
save and exit
2. Press button 2 to adjust.
Siren will chirp to confirm
sensitivity level 1-5
1. Press button 1 to
toggle between
On/Off and
sensitivity levels
3. Press button 4
to save and exit
Tone Duration
In
Seconds
On/Off Sensitivity Level
User’s Guide
Remote Transceiver Icons and Message Displays
Transceiver Charging Instructions
The transceiver is pre-charged at the factory and will operate out of the box but we
recommend that it be charge for at least 10 hours when first operated to insure full life of
battery.
battery.
1. Plug in provided charger into the transceiver.
2. While the transceiver is charging the
icon will escrow from empty to full.
3. When transceiver is fully charged the
icon will no longer change.
Recharge the transceiver every day to maintain full function.
Transceiver Battery Status
The LCD will display 3 different
icons to show the Transceiver battery status.
5
Selecting Auto/Manual Arming
Enter the programming mode. Scroll to the
icon and Press Button #1 to enter the
arming selection screen. The LCD will display the current setting ([Act] or [PAS]) and the
siren will chirp two or three times. To program follow these steps:
siren will chirp two or three times. To program follow these steps:
When entering the arming program mode, the siren and turn signals will confirm the current mode
•
Manual arming- siren chirps 2 times, lights flash 2 times
•
Auto arming- siren chirps 3 times, lights flash 3 times (In this mode the system will
automatically arm itself 60 seconds after the ignition is turned off)
Selecting Siren Tone and Alarm Duration
Enter the programming mode. Scroll to the icon and Press Button #1 to select. The
screen will display all of the sensor icons. To program follow these steps:
screen will display all of the sensor icons. To program follow these steps:
.
Adjusting the ADL202 Accelerometer (Impact/Shock) Sensor
Enter the programming mode. Scroll to the icon and press Button #1 to select.
The screen will display the current shock setting, and the siren will chirp 1-5 times to
confirm sensitivity level. To program follow these steps:
confirm sensitivity level. To program follow these steps:
To test sensitivity bump motorcycle while in sensitivity adjustment mode, a siren chirp will indicate an
alarm trigger
10
1. Press button 2 to
toggle between
the alert options
2. Press button 1
to select sensor
icon
There are 5 siren tones
and 3 cycle duration
settings for each sensor
Charger Input