Hollywog LLC HWOGTENS11 用户手册

WiTouch Pro device (1)

Remote control with 

(1) CR2032 battery

(comes installed)

Gel pads (1 pack)

#0 Phillips head screwdriver (1)

AAA alkaline batteries (2)

1.  Electrode Area: Surface where the gel pads are placed

2.  On/Off Button: Press to turn the device On/Off

3.  Start/Stop Button: Press to start or stop treatment

4.  +/- Buttons: Press to increase or decrease stimulation intensity

Before using your WiTouch Pro you will need to sync the remote control, apply the gel pads 

to the device, and prepare the device for a treatment.

The gel pads are intended for single person use. They will last, depending on skin type, oils, 

and pH levels, approximately two to five applications. Replace the gel pads when they no 

longer adhere completely. Follow these steps to apply the gel pads:

1.  Separate two gel pads.

2.  Remove the blue liner from the side 

being applied to the electrode area. Do

not remove the green protective liner.

3.  Align the shape of the first gel pad with 

the electrode area. Apply the gel pad 

onto the electrode area and firmly 

press across the entire surface to 

ensure good adhesion. 

4.  Repeat steps 1 – 3 for the second

gel pad.

•  Trim, not shave, excessive hair on

the treatment area.

•  Wash the skin and dry completely.

Not shown: User manual.