Ewig Industries Macao Commercial Offshore Limited GRP009 用户手册

1. 

Connect the Gateway to the internet via the supplied Ethernet cable. Use a port on the 

internet modem or router labeled with “LAN” or “Ethernet”. Power the Gateway.   

2. 

Connect the supplied USB cable to the power adaptor (5V), plug the smallest connector 

of the USB cable in the gateway.   

3. 

Insert the power adaptor in a power outlet. The device will turn on and several lights start 

to blink. When the power light stays continuously on, the device is ready   

Gateway LED Indicator： 

1. 

Power LED – Green LED. It does show Ethernet activities.   

2. 

Zigbee LED – Orange LED. It is used to provide information on some special cases.   

3.      Error LED – Red LED. It is used to indicate error cases.