Cameo Communications Inc DSLR2001N 用户手册
Advanced
TRENDnet
DSLR-2001N
66
Rules
After creating filters, click the Add button to set the rules on
how to implement the filters.
how to implement the filters.
Filter Key — Select the filter to assign the rule.
Enable — Check this box to enable this rule.
Protocol — Select a protocol from the drop-down list. Options are
TCP, UDP, or ICMP.
TCP, UDP, or ICMP.
Action — Select the action to execute when the rule requirement is
met. Options are:
met. Options are:
•
Drop: Select to drop the packets if the rule requirement is
met.
met.
•
Permit: Select to allow packets to pass through if the rule
requirement is met.
requirement is met.
•
Reject: Select to reject the packets if the rule
requirement is met. Select the Reject Type from the drop-
down list.
requirement is met. Select the Reject Type from the drop-
down list.
Depending on the selected protocol and the selected action, the
fields below may or may not be displayed on the screen.
fields below may or may not be displayed on the screen.
Origin IP Address — Enter the IP address of the origin of the
packets.
packets.
Origin Mask — Enter the subnet mask of the origin of the packets.
Destination IP Address — Enter the IP address of the destination
of the packets.
of the packets.
Destination Mask — Enter the subnet mask of the destination of the
packets.
packets.
Origin Start Port and Origin End Port — Enter the starting and
ending port range of the origin of the packets.
ending port range of the origin of the packets.