OKI ML3390 01091308*01256402 用户手册
产品代码
01091308*01256402
Chapter 3: Paper handling
3-10
4.
Open the top part of the cov-
er.
er.
5.
Place the continuous paper
onto the first sprocket pins
and close the cover again.
onto the first sprocket pins
and close the cover again.
6
. Adjust the right sprocket drive to suit the width of paper as de-
scribed above. Open the cover of the right sprocket drive, place
the continuous paper onto the first sprocket pins and close the
cover.
the continuous paper onto the first sprocket pins and close the
cover.
7.
Replace the paper support
and switch the printer on.
The print head will move to
the left end of the platen, the
active lamps of the operator
panel will light. The
ALARM
and switch the printer on.
The print head will move to
the left end of the platen, the
active lamps of the operator
panel will light. The
ALARM
lamp that lights in
this case indicates that there
is no paper at the printing
position.
is no paper at the printing
position.
8.
Press the FF/LOAD button,
the paper is now transported
to the initial printing position.
the paper is now transported
to the initial printing position.