Koden Electronics Co. Ltd RB715L 用户手册

(1) Press "FL VRM2" key. “SET START POINT” is displayed and a small cross mark appears.

FL VRM2

→

FL VRM2 is turned ON and

(Select FL VRM2) the small cross mark appears.

(2) Use the left-right and up-down cursor keys to place the small cross mark on one of the

two echoes whose angle will be measured, and press the "ENT" key.

Up/Down & Left/Right

→

------ ENT

Criterion of the reference point is set.

(Place the cross cursor on an echo)

(b) Measuring

Perform the operations in the above mentioned and "measuring the distance(VRM2)", and

place the VRM2 on another echo.

VRM2 is displayed on the screen based on the placed fixed cross cursor.
" 2 xx. xNM" which is displayed at the lower right will be the distance between the two

points.

5.4.7 Changing the group of Soft Keys (NEXT)

Any function can be optionally allocated to the key upon which numbers 1-7 are indicated.

A maximum of 4 groups of functions can be allocated to each soft key, and switching between
those functions is conducted by the "NEXT" key.

The "NEXT" key switches between allocated function groups on the soft key which numbers

1-7 are indicated.

Εϖερψ τιµε πρεσσινγ τηε ∀ΝΕΞΤ∀ κεψ,

function groups changes to another groups included

pressing "NEXT" key. The function groups can also be changed at the "KEY ASSIGNMENT"
function in the "CUSTOM" menu of the "SETUP" with left-right cursor key.

Operation

Soft Key Setting Example

SET1

SET2

SET3

SET4

EBL1

VAR RNG

TRACK

TARGE

VRM1

EBL2

FL EBL2

VRM2

RINGS

ZOOM

SLEEP

TUNE

SEL WIN

OFF-C

PICTURE

PPI

PPI/PP

PPI/NAV

ALL

PPI/3D

ALL