Wavetrend Technologies Limited L-TG500 用户手册
Link-IT “User Guide”
Page 12
Version 1.03
be read. If either tag is missing the computer will be disabled. The location tag is registered in
a two step procedure:
a two step procedure:
1. Select the [Enable Location Tagging] check box.
2. Select a tag from the “Tag List” and press the [Assign Tag ID] button.
Enable / Disable [Fx] keys
When starting your computer in a Windows environment the operating system can be
interrupted using [Function] keys. Enabling these function keys provides a loophole through
which your PC could be accessed even with the Link-IT system installed. To prevent this The
Administrator can disable the function keys.
interrupted using [Function] keys. Enabling these function keys provides a loophole through
which your PC could be accessed even with the Link-IT system installed. To prevent this The
Administrator can disable the function keys.
Set-up Complete
The final step in setting up your Link-IT product is to press [Next] on the “Set-up Complete”
screen.
screen.
Please note that this is your last chance to review your set-up by scrolling through the various
screens using [Back] and [Next] buttons. Pressing [Finish] while on the “Set-up Complete”
screen will initiate the copying of files to your hard drive.
screens using [Back] and [Next] buttons. Pressing [Finish] while on the “Set-up Complete”
screen will initiate the copying of files to your hard drive.
Figure 16: Set-up Complete