Wavetrend Technologies Limited L-TG500 用户手册
Link-IT “User Guide”
Page 16
Version 1.03
2.2.2.3 System
Select the “System” tab at the top of the “Properties screen”. This will display the “System”
screen as shown in the Figure below.
screen as shown in the Figure below.
The only function that can be performed in the “System” display is the testing of the Link-IT
reader. The testing of the reader does also read any tag in the environment and registers
these into the available tags list.
reader. The testing of the reader does also read any tag in the environment and registers
these into the available tags list.
If at any time you require to assign a tag to a User or an additional user see paragraphs
2.2.2.1 “Environment” and 2.2.2.5 ”Tag Setup” it is essential that you first perform the reader
test so that the system is aware of any new tags in the environment.
2.2.2.1 “Environment” and 2.2.2.5 ”Tag Setup” it is essential that you first perform the reader
test so that the system is aware of any new tags in the environment.
Figure 22: System Settings
2.2.2.4 Access Level
Select the “Access Level” tab at the top of the “Properties screen”. This will display the
“Access Level” screen as shown in the Figure below.
“Access Level” screen as shown in the Figure below.
Figure 23: Access Level
The only property that can be changed in the “Access Level” screen are User or Administrator
level.
level.