Recsol I&C Co. Ltd. RECSPEED-8050E 用户手册
8
" restart
For the product with firmware version 2.x.x.x or later. The RFC1483
mode can support LLC/SNAP bridged, VC MUX bridged,
LLC/SNAP routed and VC MUX routed encapsulation.
mode can support LLC/SNAP bridged, VC MUX bridged,
LLC/SNAP routed and VC MUX routed encapsulation.
" ip device flush
" bridge device add edd
" bridge device add
" bridge device add edd
" bridge device add
bun/port=r1483/rfc1483=true/mode=<x>/txvpi=<y>/txvci=<z>/rx
vpi=<y>/rxvci=<z>
vpi=<y>/rxvci=<z>
(<x> is the encapsulation mode of RFC1483, it can be one of
LlcBridged, VcMuxBridged, LlcRouted and VcMuxRouted, and
the setting of encapsulation mode is case sensitivity. <y> is the
VPI value, and <z> is the VCI value)
LlcBridged, VcMuxBridged, LlcRouted and VcMuxRouted, and
the setting of encapsulation mode is case sensitivity. <y> is the
VPI value, and <z> is the VCI value)
" config save
" restart
" restart
You can use following procedure to remove existing RFC 1483
setting.
setting.
" config reset bridge
" r1483 pvc none
" config save
" restart
" r1483 pvc none
" config save
" restart
" ip device flush
" config save
" restart
" config save
" restart