Given Imaging Limited SMARTPILL 用户手册

Data Receiver 
The data receiver records biomedical data sent by the capsule.  It is worn by the 
patient on a belt clip or a lanyard (around the neck). The data receiver features an 

Event button that when pushed places a marker in the electronic data. A patient diary 

for recording the time and reason for the event button use is stored on the backside of 

the receiver.  The data receiver weighs approximately 225g (0.5 lb). 

Use only the SmartPill Docking Station (REF 50100400) to charge and download data from the receiver.   

 

See Data Receiver Display Modes, Page 19 for more details. 

The backlight button turns on a light, enabling the display to be read in low light 
conditions. The backlight button is also used to turn the data receiver off.  The 

backlight button and event button (described below) must be simultaneously 

depressed for 5 seconds to turn the data receiver off. 

The Event button turns the data receiver on.  Patients press the event button when 
engaging in an event (light exercise, eating, going to the bathroom, sleeping, 

abdominal discomfort, pain, etc.) or experiencing any symptom which the clinician 

believes may affect GI physiology and may be of interest.  Pressing the event button 

inserts a marker in the test data record. 

The data receiver is equipped with a belt clip and supplied with a lanyard. The 
patient has the choice of clipping the data receiver on a waist belt or wearing the 

data receiver suspended from a lanyard. 

The patient diary is to be used by the patient to record events, activities and 
symptoms listed in the patient instruction sheet, and the date and time the events 

occurred. The entries in the patient diary should correspond to the event button 

markers inserted into the test data record when the event button is pressed.