Given Imaging Limited SMARTPILL 用户手册

To determine capsule exit, you can observe the data display on the data receiver for at 
least 2 minutes. If the data receiver is receiving data from the capsule, this icon    
appears every 20–40 seconds, which confirms that the capsule is still in the patient. No 

evidence of the icon within the 2-minute observation is presumptive evidence of 

capsule exit. Actual passage can only be confirmed clinically by examination of the 

graph or physical examination. 

Following the test, the patient returns the data receiver and patient diary to your office. 

A nurse or medical technician can perform these steps. 
1. Collect the data receiver. 
2. Ask the patient about his or her experience with the SmartPill test. Use MotiliGI’s 

Post-Test Notes screen for recording information: 
x Did the patient experience any unusual cramping, pain or discomfort? 
x At any time during the test was the patient separated from the data receiver? 
x Did the patient observe the capsule in their stool confirming body exit?  

3. Collect the patient diary. 

►

Review the diary’s contents to ensure the patient’s notes are legible and comprehensible. 

4. Release the patient.  

1. Turn on the data receiver. 
2. Connect the docking station to a source of AC power and to the system 

computer’s USB port. 

►

Check the data receiver’s battery power.  If battery power bars are not visible in the lower-

right corner of the data receiver, turn the data receiver off and charge it for 10 minutes before 
downloading. 

3. Dock the data receiver in the docking station.  
4. Launch the MotiliGI software and log in. 

x The software detects when the data receiver contains test data. A message asks 

whether you want to open the patient’s information. 

5. Click Yes.  The patient’s file opens. The file name appears in MotiliGI’s title bar. 
6. Download the data: