DeHaardt Electronic Engineering B.V. 69112201 用户手册
Manual timing & identification system using EP-30 & BP-60
3
1 Introduction
The timing and identification decoder is specially developed for precise and reliable lap &
section timing for go-karts. An detection antenna mounted in the circuit on the start/finish line
, reads the numbers of the transponders above the antenna, and forwards it through a coax
cable to the timing and identification decoder. In the timing and identification decoder the
passing transponder numbers are linked to the pass time, and transmitted by the RS-232 in a
special record format to the time management computer.
section timing for go-karts. An detection antenna mounted in the circuit on the start/finish line
, reads the numbers of the transponders above the antenna, and forwards it through a coax
cable to the timing and identification decoder. In the timing and identification decoder the
passing transponder numbers are linked to the pass time, and transmitted by the RS-232 in a
special record format to the time management computer.
1.1 System configuration
The total system consists of the next parts :
1.
Detection antenna in the circuit
2.
Connection box
3.
Coax cable
4.
Timing and identification decoder
5.
Serial cable
6.
Adapter
7.
Printer cable
8.
Timing transponder