Honeywell International Inc. 6510GP 用户手册
Cover
Locks
Locks
Main
Batt
Batt
Getting Started
Out of the Box
Verify that your carton contains the following items:
• Dolphin 6510 mobile computer (the terminal)
• Dolphin 6510 mobile computer (the terminal)
• Battery pack (3.7v, Li-Ion)
• AC power supply
(KSAS0120500200D5; Input: 100-240V AC, 50/60Hz 0.4 Amps; Output: 5 Volts DC, 2.0 A)
• Localized plug adapters
Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see
Initial Setup for Dolphin 6510 Terminals
Step 1. Install the Battery
The Dolphin 6510 is shipped with the battery packaged separate from the unit. Follow the steps below to
install the battery.
1. Release the strap making it convenient to reach the cover.
install the battery.
1. Release the strap making it convenient to reach the cover.
2. Remove the battery compartment cover by turning the cover locks upward and removing the cover.
3. Insert the battery into the battery well with the labels facing upward.
4. Replace the cover with a hinging motion and turn the locks downwards.
Note: The battery door must be installed prior to booting the unit.
5. Replace the hand strap.
2 - 1
2