Honeywell International Inc. 99EXLF 用户手册

12 - 3

Indicates if power is supplied to the HomeBase and if a terminal is docked properly in the base.

Indicates status of the battery charging in the auxiliary battery well; see 

For information about charging a battery in the auxiliary battery well, see page 12-6.

This is the communication LED. It indicates the status of data transfer between the Dolphin 
terminal and the host device. The color of this LED differs if the base is using the serial or USB 
port connection.

If using the serial port   

If using the USB port 

 

The HomeBase has power but no terminal is docked.

The HomeBase has power and the terminal is properly seated in the base.

The auxiliary battery is charging. 

The auxiliary battery has completed charging and is ready for use.

Red, Flashing The internal temperature of the auxiliary battery is too hot or there is a battery error. 

Charge the auxiliary battery in a cooler environment or replace the battery with a 
new Honeywell Li-ion or Li-poly battery.

Serial data is being sent from the host device to the base. 

Serial data is being sent from the base to the host device.

Serial data is being sent in both directions at the same time.

A USB Connection is established with the host workstation.