Honeywell International Inc. SF61B-A 用户手册
Chapter 1 — About the SF61B Cordless Scanner
SF61 Cordless Scanner User’s Guide
15
To scan with an SF61B 1D imager model
1
Turn your scanner on by pressing the scan button.
2
Connect your scanner to a Bluetooth device.
3
Point the SF61B at the bar code and hold the SF61B at a slight
angle 5 to 10 cm (2 to 4 in) from the label.
angle 5 to 10 cm (2 to 4 in) from the label.
4
Press the scan button and direct the red beam so that it falls across
all the bars in the bar code label.
all the bars in the bar code label.
Use this test bar code:
Code 39 Test Bar Code
*123456*
*123456*
Tip: Depending on your screen resolution, you may be able to scan
bar codes displayed on your computer screen.
bar codes displayed on your computer screen.
By default, when the SF61B successfully reads a bar code label, it
beeps once, the status light briefly turns green, and the scanner
beam turns off. If Vibrate Alert is enabled, the SF61B briefly
vibrates.
beeps once, the status light briefly turns green, and the scanner
beam turns off. If Vibrate Alert is enabled, the SF61B briefly
vibrates.
5
Release the scan button.
Scanning Bar Codes (example showing a 1D scanner): The aiming and
scanner beams that you see depend on the SF61B model you are using.
To scan with the SF61B2D and SF61BHP
1
Turn your scanner on by pressing the scan button.
2
Connect your scanner to a Bluetooth device.
*INTERMEC*