Honeywell International Inc. 7850LPE 用户手册
7 - 3
Using ActiveSync
ActiveSync communication happens through the mechanical connector on the bottom panel (see
) when the terminal is connected to a Dolphin communication peripheral such as the Dolphin HomeBase or a Dolphin Charge/
Communication cable.
Hardware Requirements
•
Dolphin HomeBase or Dolphin communication cable: USB or RS-232
•
Power Adapter Cable from Hand Held Products
Software Requirements
To synchronize, ActiveSync 4.1 or higher must be installed and configured for the appropriate communication type on the host
PC and the Dolphin terminal. Dolphin terminals ship with ActiveSync already installed. Therefore, if ActiveSync is already
installed on the host PC, you just need to connect the Dolphin terminal to the host PC (via Dolphin peripheral) to initiate
communication.
PC and the Dolphin terminal. Dolphin terminals ship with ActiveSync already installed. Therefore, if ActiveSync is already
installed on the host PC, you just need to connect the Dolphin terminal to the host PC (via Dolphin peripheral) to initiate
communication.
If ActiveSync 4.1 or higher is not installed on the host PC, install it from the Microsoft Companion CD that came with the Dolphin
terminal. Insert the CD into the CD-ROM drive of the host PC and click the yellow arrow, then Start Here, and follow the
directions on your screen. You can also download the most current version of ActiveSync from www.microsoft.com and install.
terminal. Insert the CD into the CD-ROM drive of the host PC and click the yellow arrow, then Start Here, and follow the
directions on your screen. You can also download the most current version of ActiveSync from www.microsoft.com and install.
The host workstation must have Windows
®
98 Second Edition*, Windows
®
Me, Windows
®
2000, or Windows
®
XP installed.
Note: The HomeBase does not support Windows NT
®
when using a USB connection because Windows NT does not support
USB. *Windows
®
98 Second Edition provides full USB support.
Setting Up the Host PC
To sync successfully, ActiveSync must be configured for same communication type on the host PC and the Dolphin terminal.
ActiveSync must be setup on your desktop computer before you initiate synchronization from the terminal for the first time.
ActiveSync must be setup on your desktop computer before you initiate synchronization from the terminal for the first time.
Verify that ActiveSync on the host PC has selected the appropriate communication type by opening ActiveSync and clicking File
> Connection Settings.
> Connection Settings.
Note: You can have both USB and RS-232 selected in the software without affecting processing. However, your hardware setup
should use only RS-232 or USB, not both.
Setting Up the Terminal
When communicating via ActiveSync, your terminal must be connected to the host PC with a communication peripheral sold/
manufactured by Hand Held Products, such as the Dolphin HomeBase or Dolphin Charge/Communication cable. Use of any
peripheral not sold/manufactured by Hand Held Products may damage your terminal and will void the warranty.
manufactured by Hand Held Products, such as the Dolphin HomeBase or Dolphin Charge/Communication cable. Use of any
peripheral not sold/manufactured by Hand Held Products may damage your terminal and will void the warranty.
You need to connect the Dolphin peripheral to the host PC, then connect the Dolphin terminal to the peripheral. ActiveSync
should attempt to connect automatically and self-configure to RS-232 or USB.
should attempt to connect automatically and self-configure to RS-232 or USB.
Verify the connection setting on the Dolphin terminal by tapping Start > Programs > ActiveSync > Menu > Connections.
For USB communication,
check Allow USB connections.
check Allow USB connections.
For RS-232 communication,
connect to COM1.
connect to COM1.
!