Honeywell International Inc. 9500LUPE 用户手册

The Dolphin HomeBase powers the terminal and fully charges its main battery pack in less than four hours. 

The HomeBase contains an intelligent battery charging system that protects the battery from being damaged by overcharging. 
The unit senses when a battery pack is fully charged and automatically switches to a trickle charge that maintains the battery at 
full capacity. Therefore, Dolphin terminals may be stored in the HomeBase without damage to the terminals, battery packs, or 
peripherals.

To check battery power, use the Power system setting; see 

For more information about Hand Held Products Li-ion batteries, see 

1. Install the battery pack in the terminal; see 

1. Connect the HomeBase to the power supply provided by Hand Held Products.

2. Slide the terminal into the terminal well until the Dock LED lights green to indicate that the terminal is 

properly seated.

3. The battery pack begins charging. 

The auxiliary battery well located on the back of the HomeBase charges a spare battery independently of 
the terminal well. The Aux Battery LED on the front panel indicates the status of the battery in this well. 

Charge time is less than four hours; see 

1. Insert the end of the battery without the locking tab into the bottom of the auxiliary well opening.

2. Snap the battery into place with a hinging motion. The Aux Battery LED lights orange.

3. Use the AUX Battery LED to monitor charging progress.