Rohde & Schwarz Inc SLV8000 用户手册
Chapter 6
Maintenance
2100.4400.32
- 6.2 -
E-2
2
Software Update
To perform a software update, you must connect the transmitter to a PC or network client
via the Ethernet and make sure that the interface (
via the Ethernet and make sure that the interface (
X30
,
ETHERNET LOCAL
or
X31
,
ETH-
ERNET REMOTE
) is correctly configured.
The procedure for performing a software update is as follows:
1. Deactivate the energy saving option of the network card in the PC. Proceed as follows:
a) Under Windows, open the Device Manager by selecting Start > Control Panel >
System > Hardware > Device Manager.
b) In the Device Manager, select the correct network adapter and then double-click to
open the associated Properties window.
c) In the Properties window, click the Power Management tab and (if required) deacti-
vate the option Allow the computer to turn off this device to save power.
2. Start the installation software on the PC/client.
The start window of the R&S Software Distributor appears.
3. Select Remote Installation and confirm with Next.
The software updates that can be installed are displayed. You can obtain additional in-
formation about the update you select by highlighting it with the cursor and then clicking
the Info button.
formation about the update you select by highlighting it with the cursor and then clicking
the Info button.