Unitech Electronics Co. Ltd. PA690BTGGR 用户手册

1. Tap Start → Settings → System

2. Tap the Scanner icon. The

Scanner Control Panel appears.

NOTE: Or press Func key and “7”

simultaneously to bring up the

Scanner Control Panel screen.

In the Scanner Control Panel screen, you can configure barcode scanner

parameters such as enabling or disabling barcode symbologies, setting data

transmission options, configuring magnetic and proximity reading options, and

setting power management options. See the section of Barcode Symbologies.

To test the barcode laser scanner, follow these instructions.

1. Tap the Test tab to activate the demo program.

2. Tap Tools → Enable Scan.

Or tap Tools → Auto-Scan →

Start Auto-Scan.

Define the scan interval. Tap Start.

3. Aim the laser scanner at the

selected barcode, and press

either one of the scanner trigger

buttons on the device.

If you enable Auto-Scan, you don’t

have to press any button. Aim the

laser scanner at the selected

barcode while the laser emits light at regular intervals. The scanned

barcode data appears on the screen.

4. Tap Tools → Auto-Scan → Stop Auto-Scan.