Agfa Gevaert N V 5365 用户手册
21
2921B EN 20031206
Working with Compact flash cards (CF-card)
The Drystar 5300 is equipped with an external CF-card slot.
A CF-card has the following physical characteristics:
•
a flat surface on one side (there is also often a label present),
•
a small rim on the other side,
•
connector holes on the opposite side of the rim side.
Inserting a CF-card
To insert a CF-card in the Drystar 5300 (the slot is located at the rear side):
1
Hold the CF-card vertically with the connector holes in front of the slot, and
with the flat surface pointing to the left.
with the flat surface pointing to the left.
2
Insert the CF-card gently into the slot, and push it until the unlocking lever
underneath the slot comes out.
underneath the slot comes out.
"
If you cannot push the CF-card completely into its position, this means
that you have to turn it 180 degrees (while keeping the connector holes
faced to the slot).
that you have to turn it 180 degrees (while keeping the connector holes
faced to the slot).