The Whistler Group SC01 用户手册
8
Powering Your Scanner
Using Batteries
Your scanner has a built-in charging circuit to maintain
peak performance of your Nickel-Metal Hydride (Ni-MH)
or Nickel Cadmium (Ni-CD) rechargeable batteries (not
supplied) while they are in the scanner.
peak performance of your Nickel-Metal Hydride (Ni-MH)
or Nickel Cadmium (Ni-CD) rechargeable batteries (not
supplied) while they are in the scanner.
For the best performance, use alkaline batteries. For
rechargeable battery holder, we recommend nickel-metal
hydride (Ni-MH) batteries. You must charge rechargeable
batteries before you use them the first time.
rechargeable battery holder, we recommend nickel-metal
hydride (Ni-MH) batteries. You must charge rechargeable
batteries before you use them the first time.
When battery power is low
B
appears and the scanner
beeps continuously.
1. Open the battery compartment.
2. Place four AA batteries (not supplied) into one of the
2. Place four AA batteries (not supplied) into one of the
battery holders as indicated by the polarity symbols
(+ and –). For non-rechargeable batteries, use the
black holder; for rechargeable batteries, use the
yellow holder.
(+ and –). For non-rechargeable batteries, use the
black holder; for rechargeable batteries, use the
yellow holder.
3. Place the battery holder into the battery
compartment and replace the cover.
Warning: Never install non-rechargeable batteries in the
rechargeable yellow battery holder. Non-rechargeable
batteries can get hot or explode if you try to recharge them.
rechargeable yellow battery holder. Non-rechargeable
batteries can get hot or explode if you try to recharge them.
RECHARGEABLE
BATTERY HOLDER
ALKALINE
BATTERY HOLDER