Wacom DTH1620 用户手册

HANDLING
WARNING

High Voltage. Do not open or disassemble the product. There is a risk of electrical shock

when the casing is open. This will also void your warranty and Wacom shall have no

responsibility to repair or replace the product.
Do not place the product on any wet surface or table. The product may slip, allowing the

product to fall from the surface.
When moving the product, ensure all cables are fully disconnected from the power

outlet, computer, and other areas. Tripping over loose cables can cause physical

damage or personal injury.
Do not place the product on any unsteady surface or table. Do not place it on slanted

areas, unstable areas, or areas where vibration is present.Physical damage or personal

injury may result if the product falls from an unsuitable surface.
Do not sit on, or hang from, the table or other surface where the product is placed. The

product may fall and cause physical damage or personal injury. Take extra care where

children are present.
If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking

from it; this liquid is an irritant. In case of contact with skin, eyes, or mouth, rinse

immediately with running water for at least 15 minutes. If contact is made with the eyes

or mouth, consult a physician.
Choking hazard. Prevent children from swallowing the pen tip or side switch. The pen tip

or side switch may accidentally be pulled out if children are biting on them. Prevent

children from playing with any packing materials or wrapping, as a choking or

suffocation hazard may exist.
Refrain from using the product during thunder or electrical storms. Disconnect the

product also from the AC power source during such weather. Using the product during

thunder or electrical storms may cause product malfunction, fire, or electrical shock.
Do not disassemble the pen. This may cause the device to malfunction. In this case,

Wacom shall have no responsibility to repair or replace the pen.
Do not strike hard objects with the pen, such as repeatedly tapping the pen against a

desk surface. Doing so may cause damage to the pen.
Do not apply excessive pressure or stress to the movable portion. This may cause

premature failure or malfunction.
Only use a replacement pen tip (nib) specified for the pen by Wacom.
This product has parts made of metal. If you show symptoms of metallic allergy during

use, stop using the product, and consult a doctor immediately.
Do not scratch the display screen. Avoid placing sharp objects on the display screen

surface.
Do not use the Felt nib. It may scratch the display screen.
Avoid intensive shock or vibration to the product, the product stand, or the pen. Hitting

or dropping the product may damage the display screen or other components.
Do not put heavy objects on the product or push against it with a strong force; this may

damage the display screen or break the product stand mechanism.
Do not place heavy articles on the product cabling, repeatedly bend the cables sharply,

or apply heavy stress to the cable connectors; this may damage the product or cabling.
Do not store the product on a surface that would excessively bend or crimp the cable.
If your product has a coated surface, a worn pen nib that is sharp or angular may cause

damage. Replace the pen tip if necessary.
Do not use any organic solvent (e.g. alcohol) or even mild detergent to clean the display

screen. Use of these cleaners can damage the display screen. Damage of this kind is not

covered by the manufacturer's warranty.
• Before cleaning, always disconnect the product from the AC power source.
• To clean the display screen, use an anti-static cloth or a slightly damp cloth. When

cleaning, apply only a light amount of pressure to the display screen and do not

make the surface wet.

• To clean the product casing, the product stand, or the pen, use a slightly dampened

(with water) soft cloth.

Always disconnect the product from the AC power source if the product appears to be

malfunctioning, has been damaged by a fall, or in some other manner.
Touching the same part of your body to the product (LCD panels and other areas) for

extended periods of time may cause low temperature burns. Avoid touching the product

with the same part of your body for extended periods of time.
Do not place metallic objects on the product when using the product. Doing so may

cause malfunction or damage to the product.
Placing other tablets or other devices near the product may affect the product's

operation and cause malfunctions. If this happens, place the interfering devices to the

side or further away from the product.
Move the product periodically to another place on your work surface to avoid

permanently discoloring or altering the appearance of the surface.
If you lift the product, hold the product with both hands.