Mustek Systems Inc WCN11BC 用户手册

This chapter provides solutions to problems that might occur during the installation
and operation of the cardbus adapter. Please read and consult to the following
remedies to overcome these difficulties.

Q1. Does my cardbus adapter installed successfully?
A1. Follow the steps below to check.

„

Right-click on My Computer icon and select Properties.

„

Select Hardware tab and click Device Manager.

„

Double click on Network Adapters and right-click on your cardbus adapter.

„

Select Properties and check the Device status field.

„

Select Driver tab to check if the driver is installed properly.

Q2. My notebook does not recognize the cardbus adapter.
A2. This is often caused by an unsuccessful installation. See below for remedies.

„

Make sure the adapter is properly inserted into the PC card slot of your note-
book.

„

If Windows does not detect the adapter after the insertion the device, remove
completely the driver and repeat the installtion (hardware and software) again.

Q3. Can not connect to the access point.
A3. See below for remedies.

„

Make sure you did not set

„

Make sure the Network Name (SSID) on the adapter is exactly the same as it
is on the access point.

„

Check the distance between your adapter and the access point.

„

Disable all security settings. (WEP, TKIP, AES)

„

Make sure your adapter is in proper channel.

„

Turn off the Access Point and the computer with the adapter. Turn on the
Access Point then your computer.

„

Press the Refresh button in the Utility.