Zebra Technologies Corporation W2WLAN11G 用户手册
50
Cannot Print Over Wireless Network
If you encountered problems while installing, or if your printer does not appear in the printers
folder or as a printer option when sending a print job, you can try uninstalling and reinstalling
the software.
folder or as a printer option when sending a print job, you can try uninstalling and reinstalling
the software.
These are possible solutions. Try one or more of the following:
1. Make Sure Your Computer Is Connected To Your Wireless Access Point
• See if you have access to the Internet by opening your Web browser and accessing
any site.
• If there are other computers or resources on your wireless network, check to see if
you can access them from your computer.
2. Move the Computer and/or Printer Closer To the Wireless Router
Although the possible distance between devices in 802.11b or 802.11g networks is 300
feet, the maximum range for optimal performance is generally 100–150 feet.
feet, the maximum range for optimal performance is generally 100–150 feet.
3. Move Your Access Point to Minimize Interference
There may be temporary interference from other devices such as microwave ovens or
other appliances, cordless phones, baby monitors, and security system cameras. Make
sure your access point is not positioned too closely to these devices.
other appliances, cordless phones, baby monitors, and security system cameras. Make
sure your access point is not positioned too closely to these devices.
4. Check Whether the Printer Is On the Same Wireless Network as The Computer
The SSID of the printer must match the SSID of the wireless network. Type the IP
address of the wireless access point (wireless router) in the Web address field of your
browser. If you do not know the IP address of the wireless access point start with item a.
If you know your access point IP address, start with f:
address of the wireless access point (wireless router) in the Web address field of your
browser. If you do not know the IP address of the wireless access point start with item a.
If you know your access point IP address, start with f:
a. Click Start.
b. Click All Programs or Programs->Accessories->Command Prompt.
c. Type ipconfig.
d. Press Enter.
e. The “Default Gateway” entry is typically the wireless access point. The IP address
b. Click All Programs or Programs->Accessories->Command Prompt.
c. Type ipconfig.
d. Press Enter.
e. The “Default Gateway” entry is typically the wireless access point. The IP address
appears as four sets of numbers separated by periods, such as 192.168.0.100.
Your IP address might also start with the numbers 10 or 169. This is determined
by your operating system or wireless network software.
Your IP address might also start with the numbers 10 or 169. This is determined
by your operating system or wireless network software.