Zebra Technologies Corporation MD-BTC2TY 用户手册
12
QL 420 User’s Guide
Loading the Media
You can operate this printer in one of two different modes:
Tear-Off or Peel-Off. Tear-Off mode allows you to tear off each
label (or a strip of labels) after it is printed. In Peel-Off mode, the
backing material is peeled away from the label as it is printed.
After you remove this label, the next one is printed.
label (or a strip of labels) after it is printed. In Peel-Off mode, the
backing material is peeled away from the label as it is printed.
After you remove this label, the next one is printed.
Installing the Media
1. Open the printer: Refer to Figure 5.
• Press the latch release button on the side of the printer as
shown at “1” below. The latch assembly will flip open au-
tomatically
tomatically
• Pull up on the latch assembly as shown at “2” to unlatch
the Media Cover.
• Rotate the media Cover back as shown at “3”, exposing
the media compartment and the adjustable media sup-
ports.
ports.
F
IGURE
5: O
PENING
THE
QL 420
Media Supports
Media
Compartment
Compartment