Zebra Technologies Corporation MD-BTC2TY2 用户手册
22
QL Series User Guide
• Printers with a wireless QuickLink module installed: a
rapidly blinking LED indicates normal data transmission.
• A steadily lit yellow LED indicates an error condition. This
can be caused by one of the following:
1. The media cover is not completely closed and latched.
2. The printer is out of media.
1. The media cover is not completely closed and latched.
2. The printer is out of media.
Figure 9: Standard Control panel
Green LED
Steady Light indicates power on
and/or established RF link.
and/or established RF link.
Fast Blink indicates no RF link (on
RF equipped units only)
RF equipped units only)
Slow Blink means low battery
Yellow LED
Steady Light indicates error
condition: out of media or
media cover not closed.
condition: out of media or
media cover not closed.
Fast Blink indicates RF activi-
ty (on RF equipped units
only)
ty (on RF equipped units
only)
Fast blink with beeper indi-
cates no application loaded
cates no application loaded
Power Button
Press to turn unit
on. Press again to
turn unit off
on. Press again to
turn unit off
Feed Button
Press to advance the media
one blank label or a soft-
ware determined length of
journal media.
one blank label or a soft-
ware determined length of
journal media.
Function Button
Specific functions are under
printer application control.
printer application control.
Figure 9: Standard Control Panel