Zebra Technologies Corporation RFID-R110XI-03 用户手册
Routine Maintenance
Clean Interior
23063L-003 Rev. 2
12/17/04
R110Xi/R170Xi User Guide
117
Clean Interior
After every four rolls of media, inspect the inside of the printer. Use a soft bristle brush or a
vacuum cleaner to remove any dirt and lint from the interior of the printer.
vacuum cleaner to remove any dirt and lint from the interior of the printer.
Printhead and Platen Roller
After every roll of ribbon, clean the printhead. Clean the printhead more often if you see
inconsistent print quality, such as voids in the bar code or graphics.
inconsistent print quality, such as voids in the bar code or graphics.
Clean after every roll (1500 feet or 450 m) of thermal transfer ribbon or after every roll
(500 feet or 150 m) of direct thermal labels or when
(500 feet or 150 m) of direct thermal labels or when
CLEAN HEAD NOW
appears on
the LCD.
To clean the printhead and platen roller, complete these steps:
1.
Open the printhead.
2.
Remove the media and ribbon (if loaded).
3.
Use Preventative Maintenance kit, part number 47362 or a solution of 90% isopropyl
alcohol and 10% deionized water on an applicator to wipe along the print elements from
end to end, as shown in
alcohol and 10% deionized water on an applicator to wipe along the print elements from
end to end, as shown in
. (The print elements are on the brown strip on the
printhead.) Allow a few seconds for the solvent to evaporate.
Note •
You do not need to turn off the printer before cleaning the printhead. If power is turned
off, all label formats and images, as well as any temporarily saved parameter settings stored in
the printer’s internal memory, are lost. When power is turned back on, these items must be
reloaded.
the printer’s internal memory, are lost. When power is turned back on, these items must be
reloaded.
If print quality does not improve after you perform this procedure, clean the printhead with
Save-a-Printhead cleaning film. This specially coated material removes contamination
buildup without damaging the printhead. Call your authorized Zebra reseller or distributor for
more information.
Save-a-Printhead cleaning film. This specially coated material removes contamination
buildup without damaging the printhead. Call your authorized Zebra reseller or distributor for
more information.
Caution • The printhead is hot and can cause severe burns. Allow the printhead to cool.
Caution • Observe proper electrostatic safety precautions when handling any static-
sensitive components such as circuit boards and printheads.
sensitive components such as circuit boards and printheads.