ZyXEL Communications Corporation EMG6765-Q10A 用户手册

Chapter 5 Access Point Mode

EMG6765-Q10A User’s Guide

Figure 15   Network > LAN > IP   

The table below describes the labels in the screen.

Table 9   Network > LAN > IP

IP Address

Obtain an IP Address 
Automatically

When you enable this, the EMG6765-Q10A gets its IP address from the network’s DHCP 
server (for example, your ISP). Users connected to the EMG6765-Q10A can now access 
the network (i.e., the Internet if the IP address is given by the ISP).

The Web Configurator may no longer be accessible unless you know the IP address 
assigned by the DHCP server to the EMG6765-Q10A. You need to reset the EMG6765-
Q10A to be able to access the Web Configurator again (see 

for details on how to reset the EMG6765-Q10A).

Also when you select this, you cannot enter an IP address for your EMG6765-Q10A in 
the field below.

Static IP Address

Click this if you want to specify the IP address of your EMG6765-Q10A. Or if your ISP or 
network administrator gave you a static IP address to access the network or the 
Internet.

IP Address

Type the IP address in dotted decimal notation. The default setting is 192.168.1.2. If you 
change the IP address you will have to log in again with the new IP address.   

Subnet Mask

The subnet mask specifies the network number portion of an IP address. Your EMG6765-
Q10A will automatically calculate the subnet mask based on the IP address that you 
assign. Unless you are implementing subnetting, use the subnet mask computed by the 
EMG6765-Q10A.

Gateway IP Address

Enter a Gateway IP Address (if your ISP or network administrator gave you one) in this 
field.

DNS Server