ZyXEL Communications Corporation EMG6765-Q10A 用户手册

 Chapter 6 Tutorials

EMG6765-Q10A User’s Guide

Clients can associate only with the SSIDs for which they have the correct security settings. Clients using 
different SSIDs can access the Internet and the wired network behind the EMG6765-Q10A (such as a 
printer). 

For example, you may set up three wireless networks (A, B and C) in your office. A is for workers, B is for 
guests and C is specific to a VoIP device in the meeting room. 

The EMG6765-Q10A is in router mode by default.

This example shows you how to configure the SSIDs with the following parameters on your EMG6765-
Q10A (in router mode).

Connect your computer to the LAN port of the EMG6765-Q10A using an Ethernet cable. 

The default IP address of the EMG6765-Q10A in router mode is “192.168.1.1”. In this case, your computer 
must have an IP address in the range between “192.168.1.2” and “192.168.1.254”.

Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to show 
your computer’s IP address. If your computer’s IP address is not in the correct range then see 

 for information on changing your computer’s IP address.

After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and type 
“http://192.168.1.1” as the web address in your web browser.

SSID_Worker

WPA2-PSK

WPA Compatible 

DoNotStealMyWirelessNetwork

Disable

SSID_VoIP

WPA2-PSK

VoIPOnly12345678

Allow

00:A0:C5:01:23:45

SSID_Guest

WPA2-PSK

keyexample123

Disable