ZyXEL Communications Corporation NBG334SH 用户手册

Chapter 5 Wireless LAN

ZyXEL NBG-334SH User’s Guide

Click Network > Wireless LAN > Advanced. The screen appears as shown.

Figure 48   Wireless LAN Advanced

The following table describes the labels in this screen. 

Set

This is the index number of the MAC address.

MAC 
Address

Enter the MAC addresses of the wireless station that are allowed or denied access to 
the ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC 
address format, that is, six hexadecimal character pairs, for example, 
12:34:56:78:9a:bc.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Reset

Click Reset to reload the previous configuration for this screen.

Table 28   MAC Address Filter

Table 29   Wireless LAN Advanced

Wireless Advanced Setup

RTS/CTS 
Threshold

Data with its frame size larger than this value will perform the RTS (Request To 
Send)/CTS (Clear To Send) handshake. 
If the RTS/CTS value is greater than the Fragmentation Threshold value, then the 
RTS/CTS handshake will never occur as data frames will be fragmented before they 
reach RTS/CTS size.
Enter a value between 0 and 2432. 

Fragmentation 
Threshold

It is the maximum data fragment size that can be sent. Enter a value between 256 
and 2432. 

Output Power 

Set the output power of the ZyXEL Device in this field. If there is a high density of 
APs within an area, decrease the output power of the ZyXEL Device to reduce 
interference with other APs.